Husqvarna 325HD75x Double Sided Hedge Trimmer

Double-sided hedge trimmer. The Husqvarna 325HD75x has been developed to combine good ergonomic design with high quality and excellent cutting performance. This machine is equipped with LowVib for lower vibration levels.

The professional machine.
The 323, 325, 327 all have a highly developed 'E tech' engine used extensively across the garden machinery range. They all have 'E' start and air purge systems making for very rapid starting (usually only a few pulls).

All HD machines have exhaust pipes directed along the blades, so no hot gasses near you or scorching the hedge.

One of the main advantages of the HD and HS range is something may never see - the clutch.
Most other clutch systems engage at 3000 rpm and work at 10 to 11000 rpm.

When one day you hit that invisible steel railing hidden in the hedge, long before the clutch disengages, you will have certainly damaged either the gear box or blades. This is the most common repair we do with other makes of hedge trimmers.

The HD and HS clutch is very small and does not engage fully until much higher revs. So when you do hit that steel rail the clutch disengages much quicker, causing less damage (if any).

The gear box has 2 balanced con rods which run on needle roller bearings. It also has the facility to turn the blades manually to get precise adjustments of the blades.

The chassis (handle frame) is spring suspended, for all day comfort.

The blades are hardened steel, fully adjustable, all teeth have ground tapered tips.

E-TECH

Smart Start®
The engine and starter have been designed so the machine starts quickly with minimum effort. Resistance in the starter cord is reduced by up to 40%.

Fuel pump
Fuel pump designed for easy starting.

LowVib®
Effective anti-vibration dampeners absorb vibration, sparing the user’s arms and hands.

Adjustable rear handle
The rear handle is adjustable to facilitate cutting the sides and top of hedges.

Comfortable handles
The rear handle has a comfort design and soft grip.

Fuel pump designed for very easy starting.
The gear components have been developed for long life under tough conditions.
The E-TECH engine combines reduced exhaust emissions with a superior power/weight ratio.

Engine specification
Cylinder displacement 1.5 cu.inch / 24.5 cm³
Cylinder bore 34 mm
Power 1.2 hp / 0.9 kW
Maximum power speed 9000 rpm
Maximum recommended engine speed 11600 rpm
Type of carburator Zama C1Q
Gear ratio 4.9:1

Equipment
Recommended maximum twig diameter 22 mm
Teeth opening 26 mm
Fuel tank volume 1 US pint / 0.5l
Fuel consumption 600 g/kWh
Knife type A
Knife length 29" / 73.5 cm
Cutting speed 4695 cut/min

Emission, vibration & noise data
Vibrations idling front/rear handle 3.5 m/s² / 2.3 m/s²
Vibration top speed front/rear handle 2.5 m/s² / 3.9 m/s²
Sound level, min/max 99 dB(A) / 99 dB(A)
Noise emission, LWA 109 dB(A)
Emission, HC 137 g/kWh
Emission, NOx 1.1 g/kWh
Emission, CO 350 g/kWh

Overall dimensions
Weight 13.0 lbs / 5.9 kg